: Only variables should be assigned by reference in /home/overskyr/public_html/includes/modules/7templates/additional_images.php
on line 25
Super-X is one of the lightest and smallest brushless quadcopter on the market. It is installed MX NANO OVERSKY 32 type X flight control board (integrated with DSMX/DSM2 or FUTABA SFHSS or FrSky receiver), it comes with 4 set of brushless power system providing double thrust of its own weight, so it is easy for 3D flying or installing FPV system etc.
Its size is so small that it can hover easily indoor.
Distance of wheelbase: 125mm
Weight:38.2g (not including battery), 49.5g (including one 400mAh3.7V battery)
Brushless motor: MR-03-H (3g, 6400KV)
Speed control: MX-3A (0.36g, 3a)
MX NANO OVERSKY 32 type X flight control board (integrated with DSM2 receiver)
Flight time: 8 minutes (1s 300mAH/25C lipo) 10 minutes (1S 400mAh/25C lipo) 12 minutes (1S 600mAh/25c lipo)
Note: The flying time was tested indoor and the flight weight was 38.2g (not including the battery weight). The actual flying time will be different according to the change of environment and load.
1, Press the binding switch on the receiver and then power MX NANO OVERSKY 32 type X Pro flight control board , then release the binding switch, the LED light blinks quickly (The receiver enters binding mode)
2, Press the binding switch on DSM2 transmitter and turn on the power.
3, When the LED light changes from quick flashing to on, it indicates the binding is success, or you may repeat the above steps.
one MX NANO OVERSKY 32 type X flight control board
Super-X frame one set;
MR-03-H brushless motor 4 pcs;
MX-3A brushless ESC 4 pcs;
75mm rotor 8 pcs(2 sets);
Several pieces of cable;
Nylon cable ties;
2 pieces of 300mAh battery
Attention: Be careful of not reversed the positive and negative pole of the battery. Please check and make sure the cables connected correctly before the first flight and make sure the rotating direction of the motors is correct.
How to unlock:
1) Pull throttle stick (THROH) to lowest point to below 1100;
2) Push Yaw to the right end or left end (according to the set up of transmitter), make it more than 1900.
set parameters up for cleanflight:
This product was added to our catalog on Friday 21 March, 2014.