Your cart is empty
Scisky Micro  F3 Brushed Flight Control built-in RX option

Strict Standards: Only variables should be assigned by reference in /home/overskyr/public_html/includes/modules/7templates/additional_images.php on line 25

Scisky Micro F3 Brushed Flight Control built-in RX option

$43.90

Description:

Scisky F3 brushed flight control board based on F3 EVO hardware, supports CleanFlight and BetaFlight firmware. There are 3 kinds of hardware for its built-in compatible receiver: A---CYRF6936, B---CC2500,C---A7105. There are 6 option protocols for the built-in compatible receiver: 1=>DSMX/2; 2 =>DEVO (on testing); 3 =>Futaba SFHSS; 4=> FrSky (on testing); 5=> FlySky AFHDS; 6=>Hubsan;

Description:

Size: 20.0*33.5*6.0mm (not including the USB protruding part)

Weight:2.5g

Brushed ESC: continuous working current is 4.2A, max current is 6A(5S);

MX VTX 25MW module (video transmitter) can be plugged and installed on Scisky F3 brushed flight control board directly, no soldering is needed, and also you can plug and play MX VTX-25MW & OSD and the analog camera, please check the following picture for reference:

 
 
The above picture shows the plugged VTX-25MW& OSD and camera installed on F3 FC.
 

Features:

1)  STM32F303CCT6 main controller;

2)  MPU6500 sensor (SPI way)

3)  6 optional built-in receivers;

4)  Onboard 5V/1000mA DCDC booster circuit;

5)  4 built-in brushed ESCs (each brushed ESC can support current up to 6A);

6)  No need soldering for installing VTX-25MW module or VTX-25MW & OSD module (note: analog VTX is 40CH)

7)  Every built-in receiver on the board outputs receiver signal in the same 8CH PPM format and order, the channel number depends on customer’s transmitter;

8)  Customer can set up the working frequency of VTX according to his own request through transmitter;

9)  Supports parameter setting up through transmitter (only FPV with OSD version gets the function)

Ports diagram (same on all of the Scisky F3 brushed FCs) 

M1~M4 ports are for connecting brushed motors, each of which is marked S1, S2, S3 and S4 on the board, “+” is for positive of the brushed motor. COM1 and COM2 are for MX VTX-25MW or MX VTX-25MW & OSD.

 

HOW TO ENTER flight control parameter setting up menu through OSD

According to the above picture: put THR stick to middle position, YAW to rightest, PIT to topmost, and then enters FC parameter setting up mode. The following pictures are the setting up options:

Note: 1) For the explanation of each setting option, please check Cleanflight and BetaFlight manual

       2) Please check MW OSD manual for OSD setting up

       3) The background of the above picture is purpose-made

 

Binding operation:

There are two ways for binding operation: one is long press(2 seconds) the button and enters binding mode; the other is time out binding.

The Flight control board with Futaba SFHSS compatible receiver and FrSky receiver belongs long press binding mode.

    Time out binding mode is for flight control board with DSMX/DSM2 , DEVO(on testing) and FlySky AFHDS compatible receiver.

Note: LED A fast blinking indicates binding mode, solid bright LED A means binding success

 

Frequency checking and setting up on analog video transmitter (the operation way will be changed according to feedback from customers)

   6 LED lights on the board indicates the working frequency of the video transmitter in binary calculation way, LED 1, LED 2, LED 3 represent 5 groups of frequency, LED A, LED B and LED C show 8 frequencies. When the board is powered, 6 LED lights flash 2 times indicates the present working frequency.

Pull the throttle to lowest, press the button slightly, you can check the current working frequency of the VTX (LED lights flash twice); Push the throttle to mid range, double press the button and then enters frequency set up mode; The LED light group shows the current working frequency when the VTX enters frequency set up mode, push or pull Elevator stick up and down, you can change the frequency groups (5 groups), pull Aileron stick right or left, you can change frequency points (8 frequency points in total); After finishing frequency set up, pull or push the throttle stick to highest or lowest position, frequency set up mode quits and the frequency changes to the set up frequency which is save on VTX, LED group lights flashes twice indicates the finished operation.

LED1

LED2

LED3

LEDA  LEDB  LEDC

 

 

 

000

001

010

011

100

101

110

111

0

0

0

5740M

5760M

5780M

5800M

5820M

5840M

5860M

5880M

0

0

1

5865M

5845M

5825M

5805M

5785M

5765M

5745M

5725M

0

1

0

5733M

5762M

5771M

5790M

5809M

5828M

5847M

5866M

0

1

1

5705M

5685M

5665M

5645M

5885M

5905M

5925M

5945M

1

0

0

5658M

5695M

5732M

5769M

5806M

5843M

2880M

5917M

注:0 --- LED_OFF,1 --- LED_ON.

Components for option:
 
1)MX VTX-25MW analog module, output power: 25MW, 40 working frequencies, plug and play;
 
2)MX VTX-25MW & OSD module: MX VTX-25MW integrated with OSD, plug and play;

 


Add to Cart:

  • Model: CR133
  • Shipping Weight: 10g
  • 998 Units in Stock

Please Choose:




This product was added to our catalog on Tuesday 11 October, 2016.