Your cart is empty
Scisky-Mul-A integrated FPV flight control board with NO RX

Strict Standards: Only variables should be assigned by reference in /home/overskyr/public_html/includes/modules/7templates/additional_images.php on line 25

Scisky-Mul-A integrated FPV flight control board with NO RX

$129.00  $93.50
Save: 28% off

Scisky-Mul-A FPV flight control board is integrated with a Scisky 32 A flight control board (supports both Cleanflight and BaseFlight firmware, onboard buzzer and three color LED tail lights), a MW OSD, a DCDC power and a 5.8G analog video transmitter (max output is 500MW), it also includes several kinds of connection port

It includes: one integrated FPV FC,  one converter adapter, two cables.

Features:

  1. Supports both Cleanflight and Baseflight firmware;
  2. Onboard buzzer and three full color LED tail lights;
  3. The 5.8G analog video transmitter applied a clock generator of 10PPM accuracy (most clock generators on market are of 30PPM accuracy)
  4. The 5.8G analog video transmitter supports FAT SHARK goggles;
  5. The video transmitter port is IPX;
  6. Independent receiver (supports DSMX/DSM2/SBUS) signal processor;
  7. Supports GPS ( only when the receiver signal is through the independent receiver signal processor)
  8. STM32F103CBT6 main control/72MHz;
  9. Onboard sensors: MPU6050, HMC5983(optional), MSR5611(optional);
  10. Supports outside compass and sonar;
  11. Onboard receiver (optional);
  12. Option for digital video transmitter port ( at the same position for onboard receiver, so customer can only choose one between the two);
  13. Working voltage: 7.4~18V (equals 2~4S lipoly, for 6S use, customer needs to place an order specially)
  14. It is compatible with DSMX/DSM2, SFHSS receiver 

Notes: The barometer sensor (MSR5611) and compass (HMC5983) on the above circuit board is for optional component, which doesn’t include in the quotation, please send us your inquiry you need them.

Scisky-MUL-A mechanical parameters:

  1. Size: 78.9*30.0*8.2mm (not including the height of tail LED and USB protruded part)

        79.0*30.0*11.4mm (including the height of tail LED and USB protruded part)

2)  Weight: 12g (including the heatsink, not including VTX antenna and onboard receiver)

3)  Hole for installation: Φ1.4mm*4

 

Scisky-Mul-A appearance (unit:mm)

 

Picture of the back of Scisky-Mul-A circuit

 

Scisky-Mul-A tail part

How USB connect with CF or OSD?

When the rear switch (at the end of the board) is turned to FC(marked on the board) side, the connecting USB is connected with CF; When the rear switch is turned to OSD side, it indicates the USB is connected with OSD (its firmware is MW OSD V1.5).

 

Ports

 

Notes: the port names marked in black is on the front of the board, the port names marked in red is at the back of the board, the blue names show the specific receiver ports

 

 

 

Frequencies for matching the switch status:

 

 

 

SW1

SW2

SW3  SW4  SW5

 

 

000

001

010

100

011

101

110

110

0

0

5740M

5760M

5780M

5800M

5820M

5840M

5860M

5880M

0

1

5865M

5845M

5825M

5805M

5785M

5765M

5745M

5725M

1

0

5733M

5752M

5771M

5790M

5809M

5828M

5857M

5866M

1

1

5705M

5685M

5665M

6545M

5885M

5905M

5925M

5945M

Notes: 0---off;  1---on

 

Power test chart for 5.8G analog VTX(27.4dBm@5.705):


Add to Cart:

  • Model: CR102
  • Shipping Weight: 40g
  • 1000 Units in Stock


This product was added to our catalog on Saturday 20 February, 2016.